Polaris 8050 Sport
Deftly navigates all pool surfaces
SKU #F8050
The Polaris 8050 Sport robotic cleaner delivers optimal cleaning performance for all in-ground pool surfaces.
The Polaris 8050 Sport robotic cleaner deftly navigates all pool surfaces, climbs walls and steps, and scrubs the tile line for thorough cleaning. Cyclonic Vacuum Technology ensures powerful cleaning action that captures debris without losing suction, and the Push’N’Go® filter canister enables easy debris removal along with a large transparent viewing window.
Additional features include the Surface Control System™ that adjusts pool surface settings for optimal wall climbing, a dual-cleaning cycle for one-touch, on-demand cleaning cycles, and a durable caddy for easy transport.
Polaris 8050 Sport Features
Cyclonic Vacuum Technology
Captures debris without losing suction
Push'N'Go® Filter Canister
Never touch debris again
Surface Control System™
Adjust pool surface type for optimal wall climbing
Transparent Lid
Takes the guesswork out of knowing when to empty the canister
Maximum Energy Efficiency
Costs just pennies per day to operate
Oversized Intake Area
Collects larger debris
Quick Cleaning
Cleans pools in as little as 1.5 hours
Polaris 8050 Sport Specifications
Polaris 8050 Sport Frequently asked questions
There is too much cable length in the water. Do not unravel the entire cable length. Place only the required length of cable in the water and place the rest on the side of the pool. Follow the procedure in "Cord Tangling" in the manual to avoid and correct tangled cord.
- Unplug floating cable from the control unit and reconnect.
- Remove cleaner from the pool and re-submerge, see Submerging the Cleaner section of the Owner's Manual.
- Press power button OFF, then Floor/Wall setting button to begin a new cycle.
- Contact Polaris Technical Support at 1-800-822-7933 (USA); 1-888-647-4004 (Canada).
- Remove cleaner from the pool and re-submerge, see the Submerging the Cleaner section in the Owner's manual.
- Clean the filter canister, see Cleaning the Filter Canister in the Owner's Manual.
- Contact Polaris Technical Support at 1-800-822-7933 (USA); 1-888-647-4004 (Canada).
- Clean the filter canister, see Cleaning the Filter Canister in the Owner's Manual.
- Adjust Surface Control System™ setting, see the Wall Cleaning section in the Owner's Manual.
- Do a shock chlorination treatment to reduce the pH levels in the pool. DO NOT leave the cleaner in the pool during this treatment.
Remove cleaner from the pool and re-submerge, see the Submerging the Cleaner section in the Owner's Manual.
- Check that the outlet to which the control unit is connected is receiving electricity.
- Disconnect the control unit and wait at least 20 seconds before reconnecting. If the problem persists, contact Polaris Technical Support at 1-800-822-7933 (USA)
No user action required. The pause does not affect the overall cleaning cycle.
